华为交换机配置命令
2024-05-11 20:56:39 泰国剧
华为交换机配置命令如下:1. 进入全局配置模式:```shell
system-view
```2. 配置交换机主机名:```shell
hostname [主机名]
```3. 配置管理IP地址和子网掩码:```shell
interface Vlanif 1
ip address [IP地址] [子网掩码]
```4. 配置SSH远程管理:```shell
user-interface vty 0 4
protocol inbound ssh
```5. 配置telnet远程管理:```shell
user-interface vty 0 4
protocol inbound telnet
```6. 配置SNMP协议:```shell
snmp-agent sys-info version v2c
snmp-agent community write [community字符串] acl [ACL名称] view [视图名称] notify all
```7. 配置网络时间同步:```shell
ntp-service unicast-server [NTP服务器IP地址]
```8. 配置VLAN:```shell
vlan batch [VLAN ID]
interface Ethernet 0/[端口号]
port link-type trunk
port trunk permit vlan [VLAN ID]
```9. 配置接口描述:```shell
interface [接口类型] [接口号]
description [描述信息]
```10. 配置端口速率和双工模式:```shell
interface GigabitEthernet 0/0/1
speed 1000
duplex full
```11. 配置静态路由:```shell
ip route-static [目标网络] [目标子网掩码] [下一跳地址]
``` 12. 保存配置:```shell
save
```以上是一些常用的华为交换机配置命令,具体配置需根据实际情况进行调整。